Modifications 3

The hospital advise that I  am allowed to drive after 6 weeks so  assuming I can can in and more importantly out of the car I will able to drive on 1st May .

As i cant kneel for long periods and don't want to impede my healing I have enlisted the help of my son to finish putting the car together .

Yellow wire in the loom ready for dash refit 

Dash was straight forward as speedo and rev counter cables were left long enough on purpose 

Dash fitted with the rev counter in the right side 

Fitted the surround with the Alarm LED  happy with the outcome .

LED fitted and hoping its bright enough 

Next its the undertrays which are amazingly fiddly made worse because of all the switches ( Bluetooth ,rev lockout and second map switch ) as well as all the associated wiring.

Forced smile as the undertray just slips in ( not)  

Once everything in and found to be working car had to come out the garage to be washed for some strange reason Connor was ok with volunteering for this job !! 

No forced smile here then 

Hip stopped play

 Everything had to stop with the car as i got my appointment though for my total hip replacement 

Apparently i will be a new man after 6 to 12 weeks .

first day after the opp 

Modifications 2

 After taking the dash out and the ECU I was unable to find the wire that I need to earth to obtain a second map which was a  plain yellow wire 

After a call to Andy and David from Canems it transpires some looms don't have this wire and you've guessed it I haven't .

Now waiting tor David to send me the wire with the pin on it hopefully easy enough job to fit 

missing pin and so no wire either 

While waiting for the wire installed 2 more switches under the dash 

one to turn the indicator beeper off ( just in case i need to ) and one for this elusive wire for the second map 

new switch on the right for indicator 

new switch on left next to blue tooth speaker  power 

Also got a holder for the led cheap enough and looks better  check the current draw of the LED and its 25mA so no big shakes with power drain .

Silicon'ed in waiting to dry 

Yellow wire arrive and very easy to fit  so now fitted in the correct pin on the ecu plug 

Plug apart 

Wire fitted and ready for ecu to go back 

At the same time fitted the flashing LED to the steering shroud ready for assembly 

Led fitted 

Modifications

 Dash out first which was more involved than i thought as one of the securing screws was turning in the dash .

Managed to get it out after removing the screen vent ( well Steve did!) 

Swapping the guages is straight forward on rebuild as the loom is long enough just need a hole for the trip button .

On to the alarm ,bought 2 red flashing led's a 3mm and 5mm 

3mm is going to be too small 

Plan to place it on the steering wheel cover 

While the dash is out i have elected to go for a buzzer instead of trying to make the indicators self canceling as i like the idea of it being retro .

I was going to make one from transistors ( from my apprentice days ) but eBay to the rescue as i could buy one for less than a fiver