After taking the dash out and the ECU I was unable to find the wire that I need to earth to obtain a second map which was a plain yellow wire
After a call to Andy and David from Canems it transpires some looms don't have this wire and you've guessed it I haven't .
Now waiting tor David to send me the wire with the pin on it hopefully easy enough job to fit
 |
| missing pin and so no wire either |
While waiting for the wire installed 2 more switches under the dash
one to turn the indicator beeper off ( just in case i need to ) and one for this elusive wire for the second map
 |
| new switch on the right for indicator |
 |
| new switch on left next to blue tooth speaker power |
Also got a holder for the led cheap enough and looks better check the current draw of the LED and its 25mA so no big shakes with power drain .
 |
| Silicon'ed in waiting to dry |
 |
| Plug apart |
 |
| Wire fitted and ready for ecu to go back |
At the same time fitted the flashing LED to the steering shroud ready for assembly
 |
| Led fitted |
No comments:
Post a Comment