Haven't been looking forward to this but cant put it off any more . .First I mounted the dash with the 5mm screws to make sure it still fits and then removed the screw one at a time to epoxy them in place .Once this had dried removed the dash and laid it next to the foam .Reading other blogs they glued the netting side of the foam to the dash so I copied that and seemed to work fine .
I made sure that the foam doesn't come round at the bottom but overlaps at the top as other builders.
Happy with the result so far will let it dry now before cutting out the holes .
 |
| Spray glue applied and lined p with the bottom captive bolts can be seen |
 |
| This bits gone well |
No comments:
Post a Comment