Brakes Clutch pipes

 Was never totally  happy with the way the brake and clutch pipes went from the chassis to the body  as seemed to be in the way and just attach to the reservoir  but couldn't see an alternative 

That is until i got talking to Global Hydraulics  who told me they could make new pipes with an elbow on each end .

Three  things i had to be careful of was 1:- the angle needs to be spot on ,2:- the length needs to be spot on and 3:-the treads are different  so had to identify the right thread .

Had a selection of elbows to work with and used my pipe as reference for length and angle.

Old pipe with new elbow used as templete for new pipes 

The new pipes were made and then fitted by Steve ( the perfectionist )so happy with the result  bleeding is the next job but time for a beer now,

Pipes in and secured with metal bracket courtesy  of Steve
flex pipes secured with "P" clips  

New pipe elbows really neat job dead happy 

Huge thanks to John from Global Hydraulics ( Grimsby )