Pedal box Fitting

Fitting the Pedal box is a two person job at best .Took the pedals off to try and get it lined up right



Fastened with 1 bolt so I can get it level and check the holes still line up  

Read on other blogs that the cylinders need to be spaced off with washers so as I had some ally plate put that on the back to try and compensate !?
Still didn't work as I still had to cut 3mm off the clutch cylinder thread but worked a treat for the brake cylinders


Fitted finally

 Some confusion with which master cylinder goes were as there are two different sizes
0.75 and 0.625 I was convinced that the bigger one should go to the front but was labelled up the other way round  a call to Andy and I was wrong the smaller one goes on the front !!

Fitted with 2 mm of free play and the bias bar fitted the right way round
 



Seats Arrive

Exciting day as finally finished with the garden decking, extension and fence so no can concentrate on the important things like building my Cobra!

My seat (with My mate Steve's foot in shot )