Seat final fit

 The seats are supposed to have a 10mm spacer at the front to lift the rake up a bit and becomes very fiddley to fit came up with the idea to weld 8mm washers together to give me the 10mm and use a 6mm washer for the last one so I could tap it out 8mm 

This held the bolts in place and made fitting the seat a lot easier 

washers welded 

this made fitting the seats a lot easier because the washers held the bolts captive ,tightened up and left 2 threads showing for IVA .

wiring

Now I have the seat wiring I can complete the loom
Wiring is colour coded for right and left which helps .I also decided to put an extra pair of wires in at the same time just in case .

Drivers side heater cable +2 spares

 Looking at other blogs and the IVA needs clipping at at least 300mm so I copied other blogers and went for 250mm

left hand side has carried the main loom as well

used 6mm clips on the drivers side and 10mm clips on the passenger with stainless self tappers and washers .

Seats and leather gear !

Catching up on the blogs
Seats and all the leather have arrived as needed the dash leather and the heated seat wiring so had to get the lot and store for later on ( happy wife)

Might look better in the car

Seats Arrive

Exciting day as finally finished with the garden decking, extension and fence so no can concentrate on the important things like building my Cobra!

My seat (with My mate Steve's foot in shot )